Bulldozer Seat in Pennsylvania - hoping to find OEM or aftermarket Loader Attachments which can be shipped fairly quickly. We currently have access to thousands of distributors across the world and can supply all of your current new and used equipment requirements.
Forklifts powered by propane are common in warehouse settings. These forklifts have a propane mount located behind the operator. These tanks need to be replaced from time to time because they have limited lifespans. Forklift drivers should always use caution when handling propane tanks. Compressed gases are dangerous, especially since the gas is flammable. Use care when removing and replacing propane tank to avoid being injured.
1 If there is a need to change the propane tank, the first step is to stop the forklift, then turn off the tank valve. The forklift must be left on until the engine dies. This procedure burns off the gas inside the transfer hose that connects the engine and the tank. Before taking the second steps, put on the proper safety equipment, like insulated gloves made of either leather or neoprene. It is essential for you to protect your skin from contact with the compressed gas, which is very cold.
2 Disconnect the hose from the tank and take off the holding straps to remove the tank. When putting in a new tank, tighten the nut to reattach the holding straps and to reattach the hose at the valve of the tank.
3 Leaks could be checked just by applying soapy water to the valve and opening it slightly. If there is a leak, it will cause bubbles to froth from around the valve. If this occurs, inspect the connection hose at the nut and the valve area. The connecting nut must be re-tightened if you detect any leaks around the area of the valve, and after that do the leak inspection process once more. Persistent leaks mean that both the nut and connecting hose must be replaced. Nonetheless, if replacing the hose and nut still does not stop the leak, the tank will need to be replaced.
4 Finally, open the valve all the way to allow the gas to fill the connecting hose. Then you could start the forklift and resume operating.
Ever since 2011, the Linden Comansa company has offered its clients the LC 1600 series tower cranes. This series consists of the models: 16 LC 260, 16 LC 220 and 16 LC 185. These models are available in different versions of maximum load. The design of the LC 1600 series enables Comansa to keep their fundamental premises, like for instance modularity and easiness of assembly and transport.
The series provides a load capacity between 8 and 12 tons, placing between the 5 to 8 ton capacity of the LC1100 and the twelve to 48 ton LC2100 model. Moreover, the LC1600 family brings together the benefits of both series which shares various factors.
Linden Comansa's Flat-Top modular system was designed for the LC 2100, and is presently in all the tower cranes built by the company. This series incorporates a lot of innovations in the specific equipment.
There are 4 Flat-Top cranes in the LC 2100 series. These cranes have the denominations of 21 LC 550, 21 LC 400 and the 21 LC 290. The latest addition to the series is the 21 LC 750. The 21 LC 750 crane is the largest in the series. It is equipped with 7 tons of jib-end load and eighty meters of jib length. This tower crane offers a maximum load of forty eight tons.
The LC3000 series by Comansa is formed by 2 models: the 30 LC 1400 and the 30 LC 1100. These two models are also in 3 different versions with different load capacities. The ranges of load capacities are thirty two, forty eight and sixty four tons or ten thousand five hundred fifty; 105,820 and 141,090 lbs.. The largest Flat-Top tower cranes have been designed mainly for public works, heavy industry, construction and mining applications.
Linden Comansa has been making large capacity cranes for lots of years. Ever since designing this series, the overall production and delivery timeframes are a lot shorter now. The business has maintained highly competitive pricing for their equipment.
